image


Resetting SC Codes 541, 542, 543, 544,545, 546, 548, 552, 555

There are some error codes that you can reset and get your machine back up and running.

If your copier looks like the one below follow these instructions:

1.     Press the YELLOW “Clear Modes” or “Reset” button above the keypad.

2.     Press 1 0 7

3.     Hold the RED Clear/Stop” button below the key pad until the screen changes

4.     Turn off the main power SWITCH on the front or side of the machine, NOT the power button by the key pad.

5.     After it shuts down completely, wait 15 seconds and restart.

6.     If the code returns call us for service.

Newer copiers have a YELLOW "Reset" button and a "C" button above a red
STOP button.

1. Press the YELLOW "Reset" button

2. Press 107 (in some cases the code to enter is 806182.  If 107 doesn't change the screen after following the instructions go back and start over and use the 806182 code.)

3. Hold the "C" button until the screen changes

4.     Turn off the main power SWITCH on the front or side of the machine, NOT the power button by the key pad.

5.     After it shuts down completely, wait 15 seconds and restart.

6.     If the code returns call us for service.

If your machine has a touch panel, go to the copy screen to access the number pad. Follow the instructions above and enter the 806182 code.